# Naviq > Naviq (naviq.com, Switzerland) makes the MTS160 magnetic guide sensor for AGVs and mobile robots. The MTS160 reports the lateral position of a magnetic tape to 1 mm and, uniquely, the angle at which the tape crosses the sensor to 1 degree, at 200 Hz, over CANopen, RS232, RS485 or USB-C. It also detects tape markers and point-source disc magnets (0.5 mm X / 0.1 mm Y) for millimeter-precise docking and stop positions. ## Product - [MTS160 Magnetic Guide Sensor](https://naviq.com/shop/mts160-magnetic-guide-sensor): 160 mm sensing width, 10 to 50 mm sensing height, 2 simultaneous tracks, position + angle, 200 Hz, IP54, M8 4-pin connector, USD 495. Full specification tables on the page. - [Magnetic Tape 25 mm](https://naviq.com/shop/magnetic-tape-25mm): plastoferrite tape, 50 m roll, north pole up, 3M adhesive. - [Magnetic Tape 50 mm](https://naviq.com/shop/magnetic-tape-50mm): same material, wider strip for higher mounting heights. - [Magnetic Point Markers](https://naviq.com/shop/magnetic-point-markers): 20 mm disc magnets, pack of 6, for X/Y position fixes at docking and charging positions. - [M8 Sensor Cable, straight, 2 m](https://naviq.com/shop/m8-sensor-cable-straight-2m) and [right-angle](https://naviq.com/shop/m8-sensor-cable-right-angle-2m). - [Free evaluation kit](https://naviq.com/evaluation-kit): sensor, 1 m of tape and 2 markers for engineers with a vehicle or bench to test on; one kit per company. ## Technical articles - [Predictive Steering Control using Angle Measurement](https://naviq.com/blog/articles/predictive-steering-control-using-angle-measurement): why position-only proportional steering oscillates in curves and how tape angle plus robot geometry gives a calculated steering angle. - [Case Study: Position-Only vs. Position + Angle Line Tracking on a Real AGV](https://naviq.com/blog/articles/naviq-case-study-angle-enhanced-magnetic-guidance-for-robust-agv-line-tracking): same vehicle, same track; mean tracking error down 40%, worst-case error halved, at one-seventh of the feedback gain. - [Cost-Optimized Magnetic-Guided AGV Using the Naviq MTS160 Sensor and the EQSP32 IoT Controller](https://naviq.com/blog/articles/cost-optimized-magnetic-guided-agv-using-the-naviq-mts160-sensor-and-the-eqsp32-iot-controller): complete reference design with wiring, firmware flow, state machine and supervisory software. - [Comparing Magnetic Navigation to Other Robot Guidance Techniques](https://naviq.com/blog/articles/comparing-magnetic-navigation-to-other-robot-guidance-techniques): magnetic tape vs. laser reflectors vs. natural navigation (SLAM), with comparison tables. ## Downloads and software - [Downloads](https://naviq.com/downloads): user manual (PDF), STEP model, CANopen EDS file, tape specification sheet. - [ROS 2 driver (Jazzy, CANopen)](https://github.com/naviq-ch/naviq_mts160_ros2): open-source driver on GitHub. - [Naviqbot](https://github.com/naviq-ch/naviqbot): controller source code and derivations used in the case study. - [Web utility](https://gui.naviq.com): browser-based configuration, live field chart, logging and firmware update over USB. - [Documentation](https://docs.naviq.com) ## Contact - [Contact](https://naviq.com/contact): info@naviq.com